DIY Leather Bow Belt

Have nothing ideas about gifts? Today I’ll share you a DIY gift tutorials of leather bow belt. Suitable for DIY starters , pretty easy and low-cost. Make and Give!8

So we’re starting with something that would be perfect for your sister or best friend (or a kiddo, if you want to make it in a mini size!). We’re getting all kinds of fancy and making a leather belt. Boom. You’ll need:

       leather strip 30″ long and 1/2″ wide

        leather scrap 6″ long and 1/2″ wide

        leather scrap 2 1/2″ long and 1/4″ wide

        scissors

        leather punch

        screw-back button stud

        strong thread & needle (and thimble, if you wish)1

FYI, definitely see if you have a leather store nearby and check in their scrap section. They gave me my leather for free and I bought the hardware, which was my only cost. I had the leather punch and sewing materials at home.

Start by trimming your leather to the specified sizes. Keep in mind that these measurements are the ones I used for myself — I wear a size 8 (Gasp! I told you!) and a small top, and this belt fits comfortably around my waist. You may need to alter the length, but no other measurements will need to change.

Once your long piece is trimmed, punch a hole on one end large enough for the button stud to fit through. On the other end, punch a small hole and attach the button stud.

Sew the 6″ piece into a bow by folding both ends in toward the center and securing. Sew the remaining piece into a loop.2 3 4 5 6

Insert the bow and the belt through the small loop and arrange the bow so that it hides the button stud when it’s fastened. The small loop should keep the bow taut in place.7

Leave a Reply

Your email address will not be published. Required fields are marked *